Fuel Pump: Service and Repair

16 14 010 Removing and installing/replacing fuel pump

Note: Fuel pump, right suction jet pump and right sensor for fuel level indication together form a single unit and can only be replaced as such.

Necessary prelinary tasks:

- Remove fuel filter. Service and Repair





- Disconnect plug. To do so, bend lug (1) on both sides outwards and pull plug apart.





- Disconnect line (2) from fuel pump.

- Unlock fuel pump by pressing lug (1).

- Release fuel pump upwards from catch.

- Remove fuel pump with sensor through service aperture.

Installation: When installed, fuel pump must clearly heard to snap into place. Do Not bend sensor arm during installation. Line (2) must not be kinked!