08 Internal Fault (RAM)

08 Internal Fault (RAM)

Possible cause(s) of fault:
- Memory cell defective

Storage condition(s):
- The memory content of the CPU data is checked for plausibility. If the RAM data indicates implausibility, a fault entry is made.

Troubleshooting procedure:
- Clear fault memory, switch ignition off/on and check whether the fault is entered again
- Yes: replace steering angle sensor
- No: ignore fault, as it is likely that EMC scatter was the cause

NOTE: After replacing the steering angle sensor, it must first be coded and then calibrated using the ABS/DSC diagnostic program.