Operation

Operation
The High navigation system is controlled by selecting the GPS navigation menu in the main menu of the central information display.
Basic settings are possible under the menu item Settings in the main menu to adapt the display to country specific requirements. The various settings can be carried out in the windows. The red markings correspond to the current settings.
With the Screen menu item in the Settings menu it is possible to switch between full and split screen.
As a result, it is possible to show the map and the navigation arrow simultaneously.
Navigation is represented with arrows while in split screen or using the OBC functions.
The mask for entering the destination is accessed after selecting the GPS navigation menu. A submenu is selected by pressing the rotary push-button on the CID control panel.
In the Announcement menu, the last voice announcement is repeated by pressing the button. By pressing the button for longer than 2 seconds, the announcement is deactivated or activated depending on the setting.

Route selection menu
Destination input
By pressing the button, current directions are ended in the Destination input menu and the input mask is selected in order to enter a new destination.

New route
It is possible to switch between map presentation mode and arrow presentation mode in the Route map menu.

Information on the current traffic situation can be selected in the Traffic information menu.

New route menu
Corresponding to the traffic situation, e.g. accident, traffic congestion etc., it is possible to calculate an alternative route. The distance for the route to be newly calculated can be selected between 110 miles.