Removing and Installing/Replacing Cover on Front Left or Right Rollover Protection Bar

51 43 030 Removing And Installing/replacing Cover On Front Left Or Right Rollover Protection Bar

Necessary preliminary tasks:
- Remove cover on rear rollover protection bar







Version with wind deflector:
Lever out plugs (1) with needle and release screws underneath.
Take off holder (2).

Installation:
Replace plugs (1).







Release catches (2) and remove cover (1) in direction of arrow.

Installation:
Fit cover (1) correctly in intermediate rings (3).







Installation:
Catches (1) on cover (2) must not be damaged.