Removing and Installing/Replacing Both Brake Disks

34 21 320 Removing and installing/replacing both brake disks





Important:
The brake disks must be replaced if their thickness is below the minimum thickness (MIN TH).
Always replace brake disks in pairs.
If the brake disks are replaced, you must also fit new brake linings.

Remove wheels.
If necessary remove and clean brake linings.
After completing tasks, adjust handbrake.





Release screws (1). Remove and suspend brake caliper from vehicle.

Note: Brake hose remains connected.


Unscrew bolts and take off brake disk.
Installation: Replace brake disk retaining screw.