Removing and Installing (Replacing) Left Front Door Sensor
Removing and Installing (Replacing) Left Front Door SensorWarning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Necessary Preliminary Tasks:
- Disconnect battery negative lead and cover, Service and Repair
- Remove front left door trim panel, Service and Repair
Unfasten plug connection (1) and disconnect.
Release screws (2) and remove front door sensor (3)
Installation:
- Tightening Torque, 65 77 7AZ.
Installation:
- Make sure front door sensor seal (1) is correctly seated. Pins (2) must be exactly seated in mountings (3).
- If necessary, replace front door sensor seal (1).
Replacement:
Carry out coding/ programming,
Observe following IDC specifications:
- Programming
- Coding
- If necessary, car and key memory
- CD "CIP"