Removing and Installing/Replacing Front ABS Pulse Generator

34 52 525 Removing and installing/replacing front ABS pulse generator





Open plug housing (1), pull plug connection (2) out of fixture and disconnect.
Pull cable with rubber grommet out of fixture on spring strut and on body.
Installation:
Ensure proper locking of plug connector and proper seating of rubber grommets.





Release hexagon socket screw (1).
Withdraw ABS pulse generator (2) from bore hole.






Installation:
Clean hole for pulse generator and grease with lubricating grease Staburags NBU 1 2/K (refer to BMW Service Operating Fluids).