Cell Phone - CPT 8000/CPT9000 Installation
SI B84 14 01Phones, Navigation Systems
November 2004
Technical Service
This Service Information bulletin supersedes SI. 84 14 01 dated March 2004.
[NEW]designates changes to this revision
SUBJECT
CPT8000, CPT9000 Telephone Installation
MODEL
E60 (5 Series)
E63/E64 (6 Series)
E65/E66 (7 Series)
SITUATION
When installing a telephone, and prior to customer delivery, the customer's local BMW center telephone number, the BMW Customer Assist telephone number and the Roadside Assistance backup number should be programmed into the vehicle in order to enable all features of the BMW mobile phone and BMW Assist Services.
Note that the Roadside Assistance and the SOS/Emergency telephone numbers are preprogrammed into the Telematics Control Unit (TCU).
PROCEDURE
1. Connect diagnostic connector of DIS Plus/GT1 (loaded with DIS CD36, or higher) to the Vehicle / Turn the key ON (KL 15)
2. Select "Diagnosis"
3. Select the series vehicle you are working on. Scroll right >At "FASTA / FASTA_Start" window, select "END" (if the Window pop up) At "IDENT-E65/E60 / Transfer" window, press "OK"
4. Select "Short test". Afier completion of short test scroll right >
5. If "Short test" shows faults in the telephone system, these must be corrected before continuing
6. Select "Function selection" / "Service functions" / "Maintenance" / "CBS handover inspection".
7. Select "Test plan".
8. Select "SCBS_0001". Page right >
9. At the selection screen, "SCBS 0001/Start". "Delete transport mode before starting pre-delivery inspection!" is displayed. Select "1. Start pre-delivery inspection" if the transport mode has been deleted.
10. On the next screen, "SCBS_0001/Start", an overview of the pre-delivery inspection is displayed. Page right>
11. On the next screen, "SCBS_0001/Reset_kilometers", the annual kilometer adaptation is reset. Page right>
12. On the next screen, "SCBS_0001/Telephone_status" enter the Roadside Assistance telephone number (1-800-332-4269) using the on screen keypad and hit the enter key. The keypad will disappear and the number should be displayed.
13. [NEW]On the next screen, "SCBS_0001/Telephone_status", enter the Customer Hotline (Assistance) telephone number (1-866-239-5575) using the on screen keypad and hit the enter key. The keypad will disappear and the number should be displayed. Disregard the telephone numbers displayed in Functional Description. These numbers will be corrected with the release of DIS CD41.
14. On the next screen, "SCBS_0001/Telephone_status" enter the applicable telephone number for your BMW Center using the on screen key pad and hit the enter key. The keypad will disappear and the number should be displayed. Page right >
15. On the next several screens, "SCBS_0001/Status_main_inspection", complete the information as it applies to this vehicle. Page right >
16. On the next screen, "SCBS_0001/Status_AU", complete the information as it applies to exhaust inspection. Page right >
17. On the next screen, "SCBS_0001/Tester time", verify that the correct tester time is displayed and correct if necessary. Make the selection "Yes/NO" and page right >
18. On the next screen, "SCBS_0001/Day counter", the day counter is reset. "Please wait" is displayed. When this is finished, page right >
19. On the next screen, "SCBS_0001/Telephone numbers", verify that the telephone numbers are correct based on the current vehicle. If the numbers are correct, then select "YES" and page right >. If not, then select "NO" and correct them.
20. On the next several screens, "SCBS_0001/First_registration_date", complete the information as applicable and make a selection "YES/NO" and page right >. If "YES" was selected, enter the information in the next several screens using the on screen keypad. Page right >.
21. On the next screen, the "SCBS_0001", the fault memories are cleared. Afier this is completed, the screen will display "Fault memory was cleared. End service function." Continue in test plan. Page right >.
22. Exit test plan and disconnect tester. Turn ignition off, close vehicle and let vehicle go to sleep (approximately 16 minutes until seat switches are no longer illuminated).
23. Turn ignition back on and enter into the iDrive "BMW Assist" menu screen. Place test calls to make sure that proper numbers were entered and that system is working properly.
PARTS INFORMATION
For available service providers (Local carriers), and related telephone handset kit part numbers, refer to the Motorola link in the BMW web site.
1. Select "CenterNet Menu" / "Parts" / "CPT Cellular Telephone"
2. Enter User ID "BMWNA" and Password "Digital" to access the Motorola web site.
3. Select "Carrier & Parts" / "Carrier & Parts Search", enter the "ZIP-Code" and press "Search" then screen displays: Carrier Owner Name, Current Deployed Technology (TDMA/CDMA), BMW P/N's, Activation #'s and Coverage Maps.