Removing and Installing/ Replacing Both Shift Paddles For Automatic Transmission

Removing and Installing/ Replacing Shift Paddles For Automatic Transmission


Necessary Preliminary Tasks:
- Disconnect battery negative lead
- Remove airbag unit
- Remove steering wheel





Release screws (1).

Remove cover (2).





Release screws (1).

NOTE:
Both shift paddles are connected to each other by way of the cable loom.

Installation:
- Make sure shift paddles (2) are correctly seated.

Version with Multifuntion Steering Wheel:
- Remove multifunction steering wheel switch.






Disconnect plug connection (1).

Feed cable loom (2) out of steering wheel and remove both shift paddles.

Instllation:
- Ensure wiring harness (2) is laid correctly.