Fluid - A/T: Testing and Inspection

Checking/Topping Up Fluid Level In Automatic Transmission (GA6HP26Z)

Caution:
^ Use only the approved automatic transmission fluid in this automatic transmission.
^ Failure to comply with this requirement will result in serious damage to the automatic transmission!





1. Topping up transmission after a repair:
Stand vehicle on a level surface and secure and rolling off.

Open filler plug (1).

Installation:
Replace sealing ring.

Top up transmission fluid until it emerges from filling orifice.

Start engine.

Replenish transmission fluid until it emerges from filling orifice.

Insert filler plug (1).
Oil filler plug 35 Nm

Press brake pedal to floor and shift through gears 1 to 6 at idle speed using steering wheel buttons several times. Then shift to "P" position (Park).

Connect BMW Diagnosis and Information System (DIS) or BMW MoDiC to vehicle.

Carry out fluid level check in accordance with instructions.

2. Checking fluid level:
Connect BMW Diagnosis and Information System (DIS) or BMW MoDiC to vehicle.

Carry out fluid level check in accordance with instructions.