Wagon

51 11 001 Replacing Front Bumper (From 10/01)

Necessary preliminary tasks:
- Unscrew and remove license plate.
- Remove holder for license plate.
- Remove rubbing strips.
- Remove complete front bumper.
- If necessary, remove front fog lamps.

Release expansion rivets on left/right.

Release nuts on left/right.
Remove bumper bracket.

Replacement of center bumper section (bracket) only:
Release nuts (1) on left/right and remove air horn (2) from bumper bracket (3).

Replacement of center bumper section (bracket) only:
If necessary, release split pins (1) on left/right and remove mounting sleeve (2) from center bumper section (3).

Replacement of bumper trim only:
Remove trim grill for bumper trim.
Lever out cover (1) for towing lug and feed retaining strap (2) out of bumper.
Detach piping (3) towards rear.