Oil Pump: Service and Repair

11 41 000 - Removing and installing/replacing oil pump (N62)





Necessary preliminary tasks:
- Drain engine oil Service and Repair.
- Remove upper oil sump section.
- Remove reinforcement plate Service and Repair.





Unscrew nut (1).
Tightening torque 11 41 4AZ 11 41 Oil Pump with Strainer and Drive.
Remove oil pump sprocket wheel (2).





Release screws, remove oil pump (1) with aid of a second person.

Installation:
Replace screws.
Tightening torque 11 41 2AZ 11 41 Oil Pump with Strainer and Drive.





Installation:
Replace sealing ring (1).
Apply light coat of oil to sealing ring (1).





Installation:
Insert oil line (2) in crankcase.
Do not damage sealing ring.





Installation:
Replace sealing ring (1).
Apply light coat of oil to sealing ring (1).
Insert oil line (2) in bore hole in oil pump.
Replace sealing ring (3).
Apply light coat of oil to sealing ring (3).

Do not damage sealing rings.

Make sure oil lines are correctly seated.





Install oil pump with aid of a second person.
Assemble engine.