Engine Controls - Engine Oil Level Incorrectly Displayed

May 2006
Technical Service

SI B 62 02 06
Instruments

SUBJECT
"Engine Oil Level" Menu Option is Displayed After Reprogramming

MODEL
E60 (5 Series) with N62 engine produced from 7/2003 up to 9/2005
E63, E64 (6 Series) with N62 engine produced from 7/2003 up to 9/2005

SITUATION
After reprogramming with Progman V21.1 or V21.2 , the menu option for "Engine Oil Level" is then incorrectly displayed in the CID under the "Service" selection. When selected, it does not function.

CAUSE
The cause is a MASK or CCC coding error depending on the vehicle option level. Only vehicles currently at the integration level, or Vehicle data status: E060-06-03-515, are affected.

Important Note:
These vehicles are not equipped with the hardware to support this function.

PROCEDURE
On a customer complaint basis only, Perform a "Complete Encoding" using Progman V22 or higher (Target data status: E060-06-06-510).
This path must be followed to enter the correct coding data into either the MASK or CCC.

Refer to SI B09 05 01 for information regarding this Progman procedure.

WARRANTY
For the appropriate labor operations, please refer to the KSD system.