Installing Replacement Transmission (GS6S53BZ SMG)

23 00 122 - Installing replacement transmission (GS6S53BZ SMG)





Important!
After completing work:
- Perform adaptation using DIS Tester, refer to "Service Functions" in DIS Tester (Teach in transmission)
- Check transmission oil level Procedures
Use only the approved transmission oil.
- Check fluid level in hydraulic system Service and Repair
- Read out fault memory and clear entered faults
Failure to comply with this requirement will result in serious damage to the manual transmission.





Recycling:
Catch and dispose of escaping transmission oil. Observe country-specific waste-disposal regulations.





Necessary preliminary tasks:
- Drain transmission oil at oil drain plug Procedures
Tightening torque 23 00 4AZ Transmission in General.
- Remove transmission Removing and Installing Transmission (GS6S53BZ SMG)





Unfasten screws.
Remove and convert transmission bearing block.
Tightening torque 22 32 2AZ 22 32 Transmission Mounts.





Modify following parts to new transmission:
- Release bearing and release lever Service and Repair
- Modify cover caps
- Ball pin and spring wire clip





Installation Note:
Observe greasing specification Removing and Installing Transmission (GS6S53BZ SMG).

Add final details to vehicle.

Check transmission oil level.





Important!
After completing work:
- Perform adaptation using DIS Tester, refer to "Service Functions" in DIS Tester (Teach in transmission)
- Check transmission oil level Procedures
Use only the approved transmission oil
- Check fluid level in hydraulic system Service and Repair
- Read out fault memory and clear entered faults
Failure to comply with this requirement will result in serious damage to the manual transmission.