Removing and Installing/Replacing Lock Element (Lock Cylinder) for Rear Lid (Up To 03/05)

51 24 050 - Removing and installing/replacing lock element (lock cylinder) for rear lid (up to 03/05)





Necessary preliminary tasks:
- Remove rear center trim





Detach cover (1) from lock element (2).





Disconnect Bowden cable (3) from element (4).

Installation:
Retainer (5) must be correctly fitted.

Version with manual unlocking:

Release screw (1).
Slide Bowden cable with holder (2) to one side.





Release screw (1).
Unscrew lock element (2) in direction of arrow from rear lid (3).





Installation:
Perform function check with rear lid open.





Installation:
Following parts of lock element (5) must not be damaged or missing:
1 - Foam
2 - Bowden cable mounting
3 - Retainer
4 - Cap