Replacing Seat Cover for Rear Seat

52 24 400 - Replacing seat cover (normal) for rear seat





Special tools required:
- 52 0 050 52 0 050 Pliers





Necessary preliminary tasks:
- Remove rear seat Removing and Installing/Replacing Rear Seat.
- Remove cup holder.





Detach retainers in areas (1).

Installation:
Bend new retainers closed with pliers 52 0 050 52 0 050 Pliers.

Unhook seat cover in areas (2).





Disconnect plug connection (1).
Disconnect plug connections (2) on left and right.
Remove seat cover (3) complete with padding.





Release clips in designated areas.
Remove seat cover (1) from padding.
Remove all remnants of retainers from seat cover and/or padding.





Installation:
Seat cover (1) is secured by Velcro-type tape (2) in padding (3).





Pull all designated trim threads out of seat cover.

Installation:
Slide trim threads into new seat cover. If necessary, cut mounting for trim threads.