Right Inlet Camshaft (N73)

11 31 034 - Right inlet camshaft bearing cap bolts (N73)
11 37 014 Removing and installing/replacing right intermediate levers (N73)






Fit preassembled bearing bracket (1) carefully on cylinder head inlet valves.
Installation:
Cam of inlet camshaft (4) faces vertically upwards at cylinder 4.
Secure nuts for bearing bracket (1) along lines (2) from inside outwards
Secure nuts (3) for guide bearing.
Installation:
Tightening torque 11 31 1AZ
M6 10 Nm
M7 14 Nm
M7-8.8 15 Nm
M8 20 Nm