Removing and Installing/Replacing Video Module for On-board Monitor

65 50 011 - Removing and installing (replacing) video module for on-board monitor





Necessary preliminary tasks:
- Disconnect battery negative lead Instructions for Disconnecting and Connecting Battery
- Remove flap in luggage compartment panel Service and Repair on left.





Note:
Follow instructions for handling optical fibers 61 00 ... Notes on Handling Optical Fibers.





Installation:
Do not mix up antenna connectors (1).

Mark antenna plugs (1) and disconnect.

Unlock plug connections (2) and disconnect.
Release screws (3).
Feed out video module for on-board monitor (4) in direction of arrow and remove.





Replacement:
Carry out coding/programming.
Observe following IDC specifications:
- Programming
- Coding
- Car & Key Memory
- CD "CIP"