Removing and Installing Top Left Timing Case Cover

Removing And Installing Top Left Timing Case Cover (N62)
(Cylinder Bank 5 To 8)

Remove left cylinder head cover.

Remove both solenoid valves on left side.





Release screw, remove holder (1).

Remove line (2) from holder.





Release screws (1 and 2).

Remove timing case cover (3).





Installation:
Free sealing face (2) on timing case cover (3) of seal debris and clean.





Installation:
Check adapter sleeves (1) for damage and correct installation position; replace if necessary.

Free sealing face (2) of seal debris and clean.





Installation:
Replace gasket (1 ) and check for correct installation position.