Computers/Controls - DRL Switched ON After Programming
SI B09 20 06Programming/Coding Explanation
October 2006
Technical Service
SUBJECT
Daytime Running Lamps Switched On after Update with Progman V23
MODEL
E90, E91 (3 Series)
SITUATION
After programming / coding the vehicle with Progman V23.00.00 / 23.00.01 or 23.01.00, the Daytime Running Lamps (DRL) are switched On even when the DRL were not activated before the update.
CAUSE
Failure in the coding data.
PROCEDURE
1. Production pre 09/2005
- Encode the FRM module with Progman V23.02.00 or higher. Refer to SI B 09 05 01 (Coding, Individualization, Programming) Procedure B.
- For DRL reactivation, refer to SI B 09 03 05 Personal Profile.
2. Production from 09/2005
The default coding for these vehicles has been changed to "DRL On".
Recoding with V23.02.00 or higher will not have any effect on the function of DRL.
- Before updating the vehicle, please note if the DRL are set "On" or "Off".
- In case the DRL were off before the update
- On CCC vehicles: Turn the DRL "Off" in the information menu.
- On RAD2 vehicles: Turn the DRL "Off" in the Personal Profile Menu in the instrument cluster.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
Defect Code refer to KSD
Labor Operation: refer to KSD
Labor Allowance: refer to KSD
Disclaimer