Body - Window 'One-Touch' Close Feature Inoperative

SI B 61 14 06
October 2006

General Electrical Systems
Technical Service

This Service Information bulletin supersedes S.M. B61 209 04 dated August 2004.

SUBJECT
"One-Touch" Close Inoperative after Door Module Replacement

MODEL
E60 (5 Series), E63, E64 (6 Series)

SITUATION
After replacement of the door module and initialization of the window, "one-touch" close will not work. No faults are stored.

CAUSE
The coding process for the replacement door module sets the "one-touch" feature in CKM (Car and Key Memory) to "Not active".

PROCEDURE
After programming, coding and initialization of a replacement door module, open CKM and reset the "one-touch" feature for power windows to "active" (refer to SI B09 03 98).





Disclaimer