With M Kit

66 31 001 - Adjusting ACC sensor





Special tools required:
- 36 1 100 36 1 100 Acc Wheel Holder
- 66 3 150 66 3 150 Socket Wrench for Acc Sensor 2





Unclip trim (1) at points (2) and remove in direction of arrow from bumper trim (3).





Installation:
Make sure trim (1) is correctly seated.

Locking hooks (2) and retaining element (3) must not be damaged.





Carry out adjustment of ACC sensor (1) with special tool 66 3 150 66 3 150 Socket Wrench for Acc Sensor 2 by means of adjusting screws (2).





Special tool required:

Active Cruise Control ACC adjusting device, complete.

Order number: 81 10 0 021 292

Consisting of:

1. Mirror, complete
2. Wheel laser
3. Slotted diaphragm
4. Control bracket (for initial installation of rail)
5. Rail
6. Setup and operating instructions (not shown)

Note:
A holder which is not included in the scope of delivery is required to support the wheel laser. Use either the quick-action clamp from the existing KDS or ACC wheel holder (36 1 100 36 1 100 Acc Wheel Holder).





Note:
- Follow instructions for ACC adjusting device.





Note:
To adjust the ACC sensor, connect the BMW diagnosis system and fit the ACC adjusting device.

Select ACC system in diagnosis. Start test module "ACC adjustment" (service functions) and proceed in accordance with instructions.

Handle ACC adjusting device in accordance with mounting and operating instructions provided with device.





Note:
Further information on the ACC adjusting device can be found in the BMW Workshop Equipment and Planning Documentation.