Cruise Control
Cruise Control
The cruise control can be activated as of approx. 30 km/h. The vehicle maintains and stores the speed set by the steering column lever.
Operation
Switch for cruise control
The switch for the cruise control consists of a steering column lever and an axial button.
The steering column lever can be switched upwards and downwards and forwards and backwards. In the forwards and backwards positions, it has two switch stages.
The main functions of the cruise control are:
Store required speeds
Up to 6 individual required speeds can be programmed. These can be stored with the vehicle stationary or while the vehicle is being driven.
In stationary vehicle:
- Switch on ignition
- set steering column lever forwards or backwards into second switch stage The speed that can be stored is displayed with an arrow symbol in the instrument cluster.
- Change requested speed. Move the switch up to the first switch stage forwards or backwards.
- Store selected speed. Press the axial button for approx. 3 seconds.
While driving:
- Activate step function. set the steering column lever forwards or backwards into the second switch stage
- Change requested speed. Move the switch up to the first switch stage forwards or backwards.
- Press the axial button for approx. 3 seconds. The current speed is stored.
Delete required speed:
A maximum of 6 speeds can be stored.
If an attempt is made to store a 7th speed, all the speed marks in the instrument cluster flash.
To delete a stored speed, select that speed. Then press the axial button for approx. 3 seconds.
Step function
The stored required speeds can be called up when the step function is active.
The step function is activated when the steering column lever is moved into the second switch stage forwards or backwards while the vehicle is being driven.
Overpressing or overpulling the switch enables changes into the next-highest or next-lowest stored speed.
If no required speeds are programmed, overpressing or overpulling increases or decreases the speed by 10 km/h.