Right Exhaust Camshaft

11 31 1AZ Right exhaust camshaft bearing cap nuts (N62/N62TU)

Important!
Camshaft bearing caps of cylinders 1 to 4 and 5 to 8 must not be mixed up.

First pass: Fit bearing caps L A2 to L A5





Note:
Retaining clips (1) for oil line are fitted on bearing caps 3 and 5.

Second pass: Insert nuts and tighten by hand without play
Third pass: Tighten down nuts on bearing caps L A2 to L A5 in 1/2 turn increments evenly from inside to outside
M6 10 Nm
M7 14 Nm
M7-8.8 15 Nm
M8 20 Nm





Fourth pass: Fit bearing cap L A1 in such a way that marking is legible from inlet side
Final pass: Install nuts and tighten down
M6 10 Nm
M7 14 Nm
M7-8.8 15 Nm
M8 20 Nm