13. Special Functions
13. Special Functions
13.1 Customer-specific printer report header
The sub-item "Customer-specific text" must be called up in the "Special functions" menu. An input screen will appear on the monitor. This input screen must be filled out with the name and address and stored with the "S" screen key. The text entered is inserted into the report header.
13.2 Adjusting options
- Call up the "Service" menu in the special functions ("S" key).
- Select the "Wheel toe adjustment" item or the "Camber adjustment" item from the "Adjustment" sub-menu. The toe and camber adjustment program will guide the user step by step through the adjustment using text and images. The measuring deviation for each measuring sensor will be shown on the screen when the adjustment has been completed.
- You can store the adjustment values in the measuring sensor using the "Store" key or you can quit the program with the "Red dot key" without saving them (check). The adjustment values can be printed out.
13.3 Rotating plate test
- Call up the "Service" menu in the special functions ("S" key).
- Call up the "Rotating plate" item in the "Service" menu. Turn the left-hand and right-hand rotating plate and check the display on the screen. Important: The measuring range is ± 306 degrees.
13.4 Viewing and deleting customer entries from database
- Call up the menu item "Delete" in the "Database" menu in the special functions. The data input screen will appear. Fill in the search fields with the data to be deleted.
- Use the "-" button to delete this data record. A new data record can then be highlighted and deleted with the digital pen.
- You can scroll through the entire database with the "Arrow up" and "Arrow down" keys.
- You can quit the delete function by pressing the cancel key (red dot).