Procedure

PROCEDURE

Before this procedure can be performed, the following preconditions must be met:

^ The BMW Handover Inspection must be carried out to ensure that the proper phone numbers are entered into the Telematics Control Unit (TCU). Refer to SI B84 14 01.

^ The vehicle must be parked outside, with the key on and an unrestricted line of sight to the sky for proper Global Positioning System (GPS) reception. GPS signal acquisition may take up to 15 minutes.

^ After programming and/or coding of the vehicle, turn the key off and let the vehicle enter sleep mode (4 minutes). If the optional CPT9000 handset has been installed, remove the handset from the eject box before turning the vehicle off.

^ Transport mode deactivated.

^ No vehicle should be displayed or sold, nor the "SOS" button be pressed, until this procedure is successfully completed as described below.

^ A vehicle that has not been provisioned will not make a 911 call (since 3/04) and does not have e-911 permission.

^ Non-provisioned e-calls are directed to a hotline number at the service provider. If the SOS button is pressed without the system being initialized, the call will be initiated but the vehicle will not transmit any vehicle data.

^ Non-provisioned e-calls are voice-only without data transmission.