Removing and Installing/Replacing Left Eccentric Shaft Sensor

11 37 035 - Removing and installing/replacing left eccentric shaft sensor (N73)





(cylinder bank 7 to 12)

Necessary preliminary tasks:
- Read out DME fault memory.
- Remove left cylinder head cover [1][2]Removing and Installing/Sealing Left Cylinder Head Cover.

Note:
Illustrations show N62.





Unfasten screws.
Remove eccentric shaft sensor (1).
Tightening torque: 11 37 1AZ 11 37 Variable Valve Gear





Assemble engine.
Check function of DME.