Removing and Installing/Replacing Servomotor for Left and Right Eccentric Shaft

11 37 022 - Removing and installing/replacing servomotor for left and right eccentric shaft (N73)





Cylinder bank 1 to 6 is identical to 7 to 12.

Note:
Illustrations show N62 and N73.

Necessary preliminary tasks:
- Remove intake air manifold Service and Repair.





Unlock plug connection (1) on servomotor (2) and disconnect.

Note:
Illustrations show N62.





Release hose clip (1).
Loosen screws (2).
Remove split holder (3).
Loosen screws (4).
Remove servomotor (5).

Installation:
Replace sealing ring on spacer.
Ensure correct installation position.