Removing and Installing/Replacing Left Front Door Sensor

65 77 740 - Removing and installing (replacing) left front door sensor





Warning!
Note airbag safety instructions [1][2]Safety Regulations for Handling Components with Gas Generators!
Incorrect handling can activate airbag and cause injury.





Note:
Follow instructions for handling optical fibers 61 00 ... Notes on Handling Optical Fibers.





Necessary preliminary tasks:
- Disconnect battery negative lead Disconnecting and Connecting Battery Negative Lead
- Remove control unit in left front door Removing and Installing/Replacing Control Unit for Left or Right Front Door





Disconnect plug connection (1).
Release screws (2) and remove front door sensor (3).

Installation Note:
Make sure sensor is mounted without play.
Tightening torque 65 77 7AZ Airbag Triggering Control.





Installation Note:
Check seal (1), replace if necessary.
Make sure seal (1) for front door sensor is correctly seated.





Replacement only:
Carry out coding/programming Programming and Relearning.