Replacing All Brake Pipes

Note:
Brake pipes are only supplied straight, in correct length and fitted with connecting nipples.

Note "General Data"

After completing work, bleed brake system.





New brake pipes must be bent as required using special tool 34 5 100.
Removed brake pipes can be used as templates for bending.

Caution:
- Protective coat on brake pipes must not be damaged while bending.
- Brake pipes must not be bent back and forth.
- Watch distances to fixed and movable vehicle parts. Brake lines may not contact or rub.
- Tighten brake-pipe couplings with torque wrench.
- Brake hose couplings (Thread M10X1) 17-19 Nm
- Brake hose couplings (Thread M12x1) 17-19 Nm