Procedures

Disassembling and Assembling Cylinder Head
(Cylinder Head Removed)

If necessary, remove coolant thermostat.





Screw on special tool 11 1 442.





Screw special tool 11 1 065 onto special tool 00 1 490.
Provide special tools for disassembling cylinder head:
- Special tool 11 1 071
- Special tool 11 1 067
- Special tool 11 0 192





- Special tool 11 1 045
- Special tool 11 0 342
- Special tool 11 0 343
- Special tool 11 0 345
- Special tool 11 1 441
Assemble special tools.





Note: Do not install special tool 11 1 441 (locating board) in special tool 11 1 065 at this stage.





Place cylinder head on special tool 11 1 065 and screw on with two screws.

Remove all valve springs, refer to Valve Springs, Service and Repair.
Remove all valve stem seals, refer to Valve Guide Seal, Service and Repair.
Remove all valves, refer to Valve, Intake/Exhaust, Service and Repair.