Removing and Installing/Replacing Left or Right Rear Light (On Rear Lid) (Up To 09/06)

63 21 183 - Removing and installing/replacing left or right rear light (on rear lid) (up to 09/06)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove panel for rear lid





Disconnect plug connection (1).
Slacken nut (2). Tightening torque 63 21 1AZ Rear Light Unit.
Feed out rear light (3) in direction of arrow and remove in outward direction from rear lid.
Remove socket housing Replacing a Socket Housing for Left or Right Rear Light (Up To 09/06).

Installation Note:
Make sure guide (4) is correctly seated in cutout for rear lid (5).
Make sure sealing frame for rear light Replacing Sealing Frame for Left or Right Rear Light (Rear Lid) (Up To 09/06) is correctly seated on rear light (3)





Installation Note:
Position lugs (1) of rear light (2) exactly over side edge of rear lid (3).