Differential Assembly: Adjustments

33 00 ... - Rear axle: wheel/chassis alignment check must be carried out after the following work





A wheel/chassis alignment check must be carried out after the following work:
- Release of following screw/bolt connections:

- Rear axle carrier to body

- Bearing block to trailing arm / body

- Upper control arm to rear axle carrier / trailing arm

- Lower control arm to rear axle carrier / trailing arm

- Replacement of following parts:

1. Rear axle carrier / rubber mount

2. Lower control arm / rubber mount

3. Trailing arm / rubber mount / bearing block / ball joint

4. Upper control arm / rubber mount / ball joint