Removing and Installing/Replacing Reinforcement Plate

Removing and Installing/Replacing Reinforcement Plate

Caution: Reinstall reinforcement plate. Driving without reinforcement plate is not permitted!





Unscrew bolts (1 - 2). Remove reinforcement plate.

Installation:
Tightening torque of screw (2):
- Reinforced plate to front axle support/engine carrier
- Jointing Torque 56 Nm
- Torque angle 90°+15°
Note: Replace Screws/Nuts.
Note: Replace screws; Tighten in empty weight or in normal position.