Replacing A Socket Housing For Both Rear Light

Replacing A Socket Housing For Left Or Right Rear Light (Side Panel Or Rear Lid)

Side panel:
Remove flap in luggage compartment trim panel.
If necessary, fold sound insulation to one side.







Turn socket housing for rear light to be replaced counterclockwise and remove.
Convert bulb, replace if necessary.

NOTE:
1. Socket housing for turn signal lamp
2. Socket housing for rear light
3. Socket housing for combined brake/rear light

Rear lid:







Remove insert in lower rear lid section panel.
Fold back insulating mat (3).
Turn socket housing for rear light to be replaced counterclockwise and remove.
Convert bulb, replace if necessary.

NOTE:
1. Socket housing for fog warning lamp
2. Socket housing for reversing light