Computers and Control Systems: Technical Service Bulletins

• Recalls
  • Campaign - DME Reprogramming
• Customer Interest
  • Electrical - MIL ON/Failsafe Mode/Codes 211/227/228
  • A/T - Erratic Operation/Fail-safe Mode/DTC's Set
  • Engine Controls - SES Lamp ON/Codes FC094/FC2760/FC2761
  • Engine Controls - Low Speed Idle Dip/Fluctuation
  • Engine Controls - Temp Gauge Goes to Red/DTC P0117 Set
  • SRS - Air Bag Lamp ON/OC3 Mat Fault Code Set
• By Symptom
  • Customer Interest
    • Electrical - MIL ON/Failsafe Mode/Codes 211/227/228
    • A/T - Erratic Operation/Fail-safe Mode/DTC's Set
    • Engine Controls - SES Lamp ON/Codes FC094/FC2760/FC2761
    • Engine Controls - Low Speed Idle Dip/Fluctuation
    • Engine Controls - Temp Gauge Goes to Red/DTC P0117 Set
    • SRS - Air Bag Lamp ON/OC3 Mat Fault Code Set
  • Driveability
    • Engine Controls - Low Speed Idle Dip/Fluctuation
  • Erratic Shifting
    • A/T - Erratic Operation/Fail-safe Mode/DTC's Set
  • False instrument warning light/gauges
    • Engine Controls - SES Lamp ON/Codes FC094/FC2760/FC2761
    • Engine Controls - Temp Gauge Goes to Red/DTC P0117 Set
  • No shift/Incorrect gear engagement
    • A/T - Erratic Operation/Fail-safe Mode/DTC's Set
  • Recalls
    • Campaign - DME Reprogramming
• All Technical Service Bulletins
  • Computer/Controls - Replacement DME Programming
  • Computers, Controls - Programming VS Veh. Data Status
  • Compuetrs/Controls - Recommended Diagnostic Procedures
  • Computers/Control - Loading/Activation Of Enabling Codes
  • Computers/Controls - ISTA Test Plan Priority Error Info.
  • Computers/Controls - ISTA/D DTC S0001 After Quick Delete
  • Computers/Controls - NAD Check And Recovery Procedures
  • Progman(R) - Programming/Coding/Individualization
    • Overview
    • General_Rules_For_Programming
    • Procedure_A_Module_Replacement
    • Procedure_B_Software_Update
    • Procedure_C_Troubleshooting
      • Index
      • Introduction
      • Section I: Preparing A Progman Session
      • Section II: Progman Session Initialization
      • Section III: Before Programming/Coding
      • Section IV: After Programming Coding
      • Illustrations and Table
    • Procedure_E_Coding
  • Campaign - DME Reprogramming
  • Electrical - MIL ON/Failsafe Mode/Codes 211/227/228
  • A/T - Erratic Operation/Fail-safe Mode/DTC's Set
  • Engine Controls - Updated DISplus/GT1 Software
  • Computers/Controls - 'Retrofit' Update Programming
  • Engine Controls - SES Lamp ON/Codes FC094/FC2760/FC2761
  • Engine Controls - Low Speed Idle Dip/Fluctuation
  • Engine Controls - Temp Gauge Goes To Red/FC10
  • Engine Controls - Temp Gauge Goes to Red/DTC P0117 Set
  • Engine Controls - Various Driveability Complaints
  • Electrical - Oil Level Sensor Diagnostic Hints
  • Engine Controls - Progman(R) V22.1/V22.1.1 and V22.1.2
  • Engine Controls - False Maintenance Interval in Progman
  • Computers/Controls - Progman(R) V22.0/V22.0.1 Errors
  • SRS - Air Bag Lamp ON/OC3 Mat Fault Code Set
  • Engine Controls - Progman(R) V21.01 and V21.02.01 Errors
  • Engine Controls - Progman(R) V21.0 Software Errors
  • Computers/Controls - Programming/Codoing Explanations