Replacing Both Pipelines For Ride Level Control

Replacing Both Pipelines For Ride Level Control

Caution:
In area of air line connections, extreme cleanliness must be ensured during removal and installation.
Even small dirt particles can cause leakage in the system.





Remove trunk floor trim.
Remove right luggage-compartment paneling. Detach pipe on distributor block (lower arrows), refer to Assembly Instructions For A New Tube (Air Line) and New Screw Connection.

Installation:
Refer to Assembly Instructions For A New Tube (Air Line) and New Screw Connection. Install pipes of same color.





Detach pipe at plug-in coupling of air reservoir.
After completing work, control system up.

Installation:
Refer to Assembly Instructions For A New Tube (Air Line) and New Screw Connection.