25 11 001 Replacing Complete Shift Lever

25 11 001 Replacing Complete Shift Lever

Necessary Preliminary Tasks:
- Remove selector lever, please refer to: 25 11 000 Removing and Installing Shift Lever
- Remove vibration damper (if fitted).




Detach mount from selector lever.

Installation:
- Grease ball joint.
- Grease, use only BMW approved: Kluber Polylob GLY 801




Detach rubber gaiter from selector lever.

Installation:




- Degrease selector lever (1).
- Coat rubber bellows on inside of shaped section (2) with Circolight -83 19 9 407 771-.
- Pull rubber gaiter from above over selector lever and align.
- Arrow (3) on rubber gaiter must point in direction of travel (A).