Replacing Both Windshield Wiper Arms

Removing And Installing/Replacing Both Windshield Wiper Arms

Special tools required:
- 61 6 060







Remove cover (1).







Unscrew nut (1).

Installation:
Tighten nut to appropriate torque.
8AZ Wiper arms
E53 30 Nm
Note: Due to risk of releasing: check TT after approx. 15 mins. settling time.

After waiting 15 minutes,
retighten nut to appropriate torque.
8AZ Wiper arms
E53 30 Nm
Note: Due to risk of releasing: check TT after approx. 15 mins. settling time.

CAUTION: Do not bend wiper arm during removal (risk of breakage).







Detach windshield wiper arm with special tool 61 6 060.

Replacement:
Remove wiper blade.

Installation:
Adjust position of wiper arm in question in rest position (measured between wiper lip and top edge of cowl panel cover).
Then tighten down wiper arm and check position of relevant wiper arm again.







1. 54 ± 3 mm
2. 55 ± 3 mm