Removing and Installing/Replacing Right Trunk Wheel Arch Trim

51 47 161 Removing And Installing/Replacing Right Trunk Wheel Arch Trim

Remove inside window cavity cover strip for door window, rear right.







Lever out cover plate (1) in lashing eye. Unfasten screws (2).







Release expansion rivets (1) and (2).







Disconnect plug connections (1) on both 12 V sockets (2).
Removing right luggage compartment wheel arch trim.

Installation:
Check catch of socket housing in luggage compartment wheel arch trim.
If necessary, replace 12 V sockets.







Replacing 12 V sockets:
Open cover (1) of socket housing.
Turn socket insert (2) approx. 30° to right.
Turn socket insert (2) under tension back into initial position and pull out of socket housing.







Installation:
Align socket insert (1) with retaining lugs (2) to groove (3) of socket housing and slide in until it is felt snapping into place.







Pull socket housing (1) approx. 5 mm out of wheel arch trim (2) and tilt out to right at bottom.

Installation:
Insert socket housing with plastic lugs (3) into wheel arch trim and lock with retaining lugs (4).