Replacing Seal For Slide/Tilt Sunroof Lid At Rear

Replacing Seal For Slide/Tilt Sunroof Lid At Rear

Necessary preliminary tasks:
- Open glass slide/tilt sunroof

NOTE: Follow repair instructions for bonded seals on glass slide/tilt sunroof.







Detach seal (1) from slide/tilt sunroof lid.

Installation:
Clean bonding surface with adhesive remover (sourcing reference: BMW Parts Service).

Press seal without stretching (squashing).

IMPORTANT:
Do not touch bonding surface.
Surface temperature >=20 degree C
Incorrect bonding of the seal will result in leakage.