Condenser Fan: Service and Repair

Removing and Installing/Replacing Fan Cowl with Electric Fan


Necessary Preliminary Tasks:

- Read out faul memory of DME unit
- Switch off ignition
- Remove intake hood
- Unlock intake pipe and disconnect
- Unclip coolant hose from fan cowl







Unlock plug ( 1 ) and remove.

Unlock plug ( 2 ) on AUC sensor and disconnect, unclip cable.







Unlock holder ( 1 ) and move in direction of arrow.







Raise fan cowl ( 1 ) approx. 2 cm, carefully press towards rear and lift out.







Installation:
Insert retaining tab ( 1 ) at bottom on module carrier.
Convert AUC sensor when replacing fan cowl.

Note:
Now clear the fault memory.