Removing and Installing/Replacing Left Headlight (Xenon Headlight)

Removing And Installing Left Headlight (Xenon Headlight)

WARNING:
Version with xenon headlights: Danger to life due to high voltage. Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.

Necessary preliminary tasks:
- Up to 10/2003:
Remove trim from left headlight housing.
- From 10/2003:
Remove front bumper trim.

Up to 10/2003:







Cover bumper in area of headlight (3).
Release screws (2) on top and rear sides of headlight (3).
Remove headlight (3).







Disconnect plug connections (1).
Release screw (2) and remove retaining bracket for xenon control unit.
Remove headlamp (3).

From 10/2003:







Release screws (1).
Unlock and disconnect plug connection (2) and if necessary further plug connections.
Remove headlamp (3) in direction of arrow.

Installation:
- Adjust gap dimensions
- Adjust headlights