Fluid Filter - A/T: Service and Repair

24 11 100 Removing and installing/replacing transmission screen (A5S 360R / 390R, A4S 200R)

Important! After completion of work, check transmission oil level.
Use only the approved automatic transmission fluid.

Failure to comply with this requirement will result in serious damage to the automatic transmission!

Necessary preliminary tasks:
^ Remove transmission oil sump.





Pull off transmission fluid screen (1) towards bottom and remove.





If the sealing ring (1) has remained in the pump housing, it must be removed and the transmission fluid screen replaced.





Installation:
Different transmission fluid screens are used in petrol/gasoline and diesel engines.
Therefore check specified measurement A prior to installation.
Measurement A:
Gasoline engine:
- M52TU = 39.00 ± 1.00 mm
- M43TU = 30.00 ± 1.00 mm

Diesel engine:
- M57 = 30.00 ± 1.00 mm

Position (1): Two gaskets are fitted.