Antitheft - No Engine Crank After CAS3 Replacement

SI B 61 12 07
General Electrical Systems

October 2009
Technical Service

This Service Information bulletin supersedes SI B61 12 07 dated October 2009.

[NEW] designates changes to this revision

SUBJECT
No Crank After CAS3 Replacement

MODEL
E90, E91, E92, E93 (3 Series) vehicles produced from 6/2006

E70 (X5) [NEW] vehicles produced from 9/2006

E71 (X6)

E82, E88 (1 Series)

E60, E61 (5 Series) vehicles produced from [NEW] 9/2006

E63, E64 (6 Series) vehicles produced from [NEW] 9/2006

SITUATION
After replacing the CAS3 (Car Access System), the vehicle has a "No crank" condition.

CAUSE
The CAS "Line mode" is still active.

PROCEDURE
Use ISTA to delete the "Line Mode". Select "Activities/Service function/Drive/CAS/Reset starter interlock", and then run the test plan S6100_KL50MONT.

[NEW]Note that for certain vehicles up to 3/2007, the test plan may not be available. Identify the vehicle manually by selecting "Basic features" and select a production date after 3/2007 (e.g., input a 6/2007 production date). The test plan will then be available.

WARRANTY INFORMATION
For information only





Disclaimer