51 16 206 Removing and Installing / Replacing Centre Armrest

51 16 206 - Removing and installing / replacing centre armrest





Necessary preliminary tasks:
- Move both front seats forwards





Important!
Grip behind trim (1) from below and release catch (2) (risk of damage).

Pull trim (2) towards rear and release from catches (3).





Installation:
Catches (1 and 3) must not be damaged.
Guides (2) must not be damaged.
If necessary, release rear compartment fresh-air grille 64 22 191 Removing and Installing/Replacing Rear Cabin Fresh-Air Grille in order to install trim correctly.





Note:
Open centre armrest otherwise spring (1) will be under too much tension.

Disengage spring (1) with screwdriver (2).

Installation:
Make sure spring (1) is correctly seated.





Drive out hinge shafts (1).

Note:
Hinge shafts (1) are secured on the outside with toothing (3).

Remove spring (2), open centre armrest and feed out of storage compartment.