54 10 200 Removing and Installing Complete Glass Tilt Sunroof

54 10 200 - Removing and installing complete glass tilt sunroof





Necessary preliminary tasks:
- Remove roofliner 51 44 005 - Removing and installing/replacing roofliner (version without glass tilt sunroof)
- Remove glass tilt sunroof lid 54 10 100 Removing and Installing Glass Tilt Sunroof Lid

Important!
A second person is required to help in removing the glass tilt sunroof.
Cover door sill with protective covers (risk of damage).
Do not damage any surrounding parts when removing slide/tilt sunroof (5).





- Unlock and disconnect plug for drive unit for floating roofliner (1) and glass tilt sunroof lid (2).

- Unclip wiring harness (3).

- Glass tilt sunroof is inserted into body in area (4) and thus secured against falling out.

- Secure glass tilt sunroof in front area against falling out by supporting it.

- Release screws in marked area from rear towards front.

Tightening torque: 54 10 6AZ 54 10 Glass Tilt Sunroof

- Remove slide/tilt sunroof (5) completely (through front door).

Installation:
Do not crush any cables when fitting the glass slide/tilt sunroof.
Initialise Testing and Inspection glass slide/tilt sunroof.