Removing and Installing/Replacing Both Adjustment Units (N62TU)

11 61 093 - Removing and installing / replacing both adjustment units (N62TU)





Necessary preliminary tasks:
- Remove center equipment compartment bulkhead 51 71 085 Removing and installing center of assembly compartment bulkhead





Removal of right adjustment unit (2) is identical to that of left adjustment unit (1) shown here.
Unlock plug (1) and detach from left adjustment (2).
Unfasten screws.

Installation:
Replace screws.

Pull adjustment unit (1) out of air intake manifold.

Installation:
Rotate drive shaft on adjustment unit (1) into correct position.