Blower Motor: Service and Repair

64 11 213 - Removing and installing/replacing heater - A/C unit fan





Necessary preliminary tasks:
- Remove trim panel for pedal assembly 51 45 185 Removing and Installing/Replacing Panel For Pedals.
- Remove right glovebox with housing 51 16 366 - Removing and installing right glovebox with housing (without active knee protection).
- Remove bottom right instrument panel trim 51 45 181 Removing and Installing/Replacing Bottom Right Trim For Instrument Panel.
- Remove storage compartment 51 16 200 Removing and Installing Storage Compartment.
- Remove audio system controller Removing and Installing/Replacing Audio System Controller /
remove Car Communication Computer Removing and Installing/Replacing Car Communication Computer.





Release screws (3) and (4).
Remove middle function carrier (5) in direction of arrow.

Installation:
Make sure middle function carrier (5) is correctly seated.
Ensure correct cable routing.





Disconnect left air duct (1) in direction of arrow (2) and (3).

Installation:
Make sure right air duct (1) is correctly seated.





Disconnect right air duct (1) in direction of arrow (2) and (3).

Installation:
Make sure right air duct (1) is correctly seated.





Unlock plug (1) and remove.
Release screws (2).
Remove cover (3) in direction of arrow.

Installation:
Ensure correct cable routing.
Make sure seal is correctly seated in cover (3).





Release screws (1).
Remove fan for heater - A/C unit (2) in direction of arrow.

Installation:
Make sure fan for heater - A/C unit (2) is correctly seated.





Replacement:
Unlock controller for heater - A/C unit fan (1) with a suitable screwdriver (2) and remove.
Unlock plug connections (3) and disconnect.

Installation:
Make sure controller for heater - A/C unit fan (1) is correctly seated.