52 24 408 Replacing Backrest Cover For Rear Seat

52 24 408 Replacing backrest cover for rear seat







Special tools required:
- 52 0 050







Necessary preliminary tasks:
- Remove backrest
- If necessary, remove centre armrest
- Remove all guide sleeves







Specification with centre armrest:
Unclip cover (1) towards front.

Installation:
If necessary, replace faulty clips (2).







Detach backrest cover (1) in marked area from backrest frame.







Detach welt (1) from backrest cover in marked area from backrest frame.
Release all retainers in area of left and right guides.

Installation:
Insert new clamp (2) with special tool 52 0 050 and bend closed.

Remove backrest cover with padding from backrest frame.







Detaching cover from upholstery:
- Release all retainers in marked area.
- Remove cover from padding
- Remove remaining retainers from cover and padding.







Installation:
Insert new clamp (2) with special tool 52 0 050 and bend closed.

1. Padding
2. Retainer
3. Trim wire in padding
4. Trim wire in backrest cover
5. Backrest cover







Replacing cover:
- Remove all trim wires from cover
- If necessary, cut pockets in new cover for trim wires
- Push trim wires into pockets